How to Glaze a Window
To seal your windows properly so that there is no unwanted water and air, glazing ought to be replaced after a certain period. Although glazing takes some time and skill, you can still glaze your windows by yourself; use the below guidelines.
Ensure you have all you need. You should make sure you have all the items that will be needed to glaze your window. The things that will help you glaze a window correctly include putty, a putty knife, clean rags, sandpaper, paintbrushes, paint, adhesive tape, and more. There are high chances that most of the items are in your garage or house but if they are not, you can buy them from nearby hardware.
Remove the old putty and glass. You should put a newspaper on both sides of the pane. Secondly, damage the glass using a hammer and separate it from the pane. Next, loosen up the putty using the putty knife. If the putty does not easily come out when one is using a knife; they should consider melting it using the blow torch. You should get the frames free of the metal fasteners.
Smooth the wood. You should use the sandpaper to make the wood smooth. After smoothening it sufficiently, treat the wood using the oil-based primer then seal it off. It is important o apply primer because it hinders oil absorption that can result in cracks on the glazing after a short time, meaning more drafts. The primer ought to be left for 24 hours so that it dries.
Knead the putty. After kneading the putty till it is soft, stretch it along the window panes inside and press it with your fingers. Use the putty knife to ensure it is as tightly pressed as possible. After placing the putty, fit the new pane.
You should put new glazing. Place glazier points at the center of the window pane and press the point into place using the putty knife. Ensure all the sides of the window pane have glazier points then apply new glazing on each side of the window frame. Apply pressure to ensure the glazing has held the glass pane securely. You should remove the extra putty.
You should let the glazing dry and paint it. Ensure you leave the glazing for a period of ten days for drying purpose. You may be irritated with fingerprints being on the glass but do not clean it until it is dry. Consider cleaning up the window using the paint and oil-based primer while being sure it has an appearance similar to that of the other windows and you can read more here on this website.